PYBK988 Oil Pump Test Controller for Diesel Test Bench

PYBK988 is the control unit for the oil pump side of a diesel test bench. Five red LED displays show air pressure in MPa, temperature in degrees C, count number, length in mm and motor speed in RPM at the same time.

Set points are entered on the keypad with the T, N and S keys, and the panel carries separate start and stop buttons for the oil pump and for the motor, plus the L-W-R direction switch and the temperature switch. Sensor and motor cables plug into the circular connectors on the side of the case.

On the panel

• Five displays: air pressure, temperature, number, length, motor speed

• Set keys T, N, S with digit keys and up and down

• Auto/manual A/M, forward/reverse F/W, pause, L zero

• Oil pump start and stop, motor start and stop

• Count start and L-W-R direction switch

• Temperature on and off switch

Technical data

Product views