Mini CRS900S 8 Cylinder Mechanical and Common Rail Injector Pump Test Bench

Mini CRS900S is an 8-cylinder test bench that runs Euro II mechanical inline pumps and common rail injectors and pumps on one machine. A shop that repairs both older mechanical pumps and modern CR units can qualify a job in one pass, without keeping two benches or sending the work out.

Standard functions

• Test of 8-cylinder Euro II mechanical inline pumps, 11 kW drive, 380 V three-phase supply

• Common rail injector and pump test by flow sensor, results shown on the computer display

• Injector coding for Bosch, Denso, Delphi and Siemens, including Piezo injectors

• Speed set through a frequency converter, stable at load

• Forced cooling holds the test oil at working temperature during long runs

Optional functions

• Simultaneous test of 2, 4 or 6 injectors by flow sensor or by measuring cylinder

• EUI and EUP test with cam box TU-C, TU-D or TU-E, 10 or 23 adaptors

• HEUI dual fuel line, HEUP actuation pump, CAT 320D pump

• VP37, VP44, RED4 and V3 V4 V5 electronic pumps, ramp slope check

The electronic control system holds rail pressure at the set value while the flow of each injector is logged against the test plan, so a pass or fail comes from measured data rather than from a visual check.

The built-in database covers more than 8000 injector part numbers from the main brands, which gives a complete test plan for most units that arrive at the bench.

Technical data

Product views